Dell 9.7(0.0) manual Type Key, Ip ospf cost cost

Parameters

Defaults

Command Modes

Command History

Usage Information

encryption-	(OPTIONAL) Enter 7 to encrypt the key.
type
key	Enter an eight-character string. Strings longer than eight
	characters are truncated.
Not configured.
INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

All neighboring routers in the same network must use the same password to exchange OSPF information.

ip ospf cost

Change the cost associated with the OSPF traffic on an interface.

S6000

Syntax	ip ospf cost cost
	To return to default value, use the no ip ospf cost command.
Parameters	cost	Enter a number as the cost. The range is from 1 to 65535.
Defaults	The default cost is based on the reference bandwidth.
Command	INTERFACE
Modes

Open Shortest Path First (OSPFv2 and OSPFv3) 1083