Dell 9.7(0.0) manual Enter the keyword bfd to enable debugging of all Vffp BFD

Command Modes

Command History

Usage Information

	• For a Port Channel interface, enter the keywords port-
	channel then a number.
	• For a VLAN interface, enter the keyword vlan then the
	VLAN ID. The VLAN ID range is from 1 to 4094.
vrid	(OPTIONAL) Enter a number from 1 to 255 as the VRRP
	group ID.
all	Enter the keyword all to enable debugging of all VRRP
	groups.
bfd	Enter the keyword bfd to enable debugging of all VFFP BFD
	interactions.
database	Enter the keyword database to display changes related to
	group, prefix, and interface entries in the VRRP table.
packets	Enter the keyword packets to enable debugging of VRRP
	control packets.
state	Enter the keyword state to enable debugging of VRRP state
	changes
timer	Enter the keyword timer to enable debugging of the VRRP
	timer.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

8.3.19.0Introduced on the S4820T.

8.3.10.0Introduced on the S4810.

8.4.1.0Introduced on E-Series ExaScale, C-Series, and S-Series. Support was added for IPv6 VRRP groups in non-default VRF instances.

8.3.2.0Introduced on the E-Series TeraScale.

If no options are specified, debug is active on all interfaces and all VRRP groups.

1680 Virtual Router Redundancy Protocol (VRRP)