Dell 9.7(0.0) manual Clns host name nsap, Nsap

VersionDescription

8.3.11.1Introduced on the Z9000.

clns host

Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.

Syntax

Parameters

Defaults

Command Modes

Command History

clns host name nsap

name	Enter an alphanumeric string to identify the name-to-NSAP
	mapping.
nsap	Enter a specific NSAP address that is associated with the
	name parameter.
Not configured.
ROUTER ISIS

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

Usage	To configure a shortcut name that you can use instead of entering a long string of
Information	numbers associated with an NSAP address, use this command.
Related	hostname dynamic — enables dynamic learning of host names from routers in the
Commands	domain and allows the routers to advertise the host names in LSPs.

Intermediate System to Intermediate System (IS-IS) 845