Dell 9.7(0.0) manual Errors , warnings , notifications , informational , or

Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux (PMUX) mode only.

Parameters

Defaults

Command Modes

Command History

Related Commands

To return to the default values, use the default logging console command.

To disable logging to the console, use the no logging console command.

level	(OPTIONAL) Indicate a value from 0 to 7 or enter one of the
	following parameters: emergencies, alerts, critical,
	errors, warnings, notifications, informational, or
	debugging. The default is 7 or debugging.

level = 7; size = debugging

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

9.2(0.0)

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

clear logging — clears the logging buffer.

default logging console — returns the logging console parameters to the default setting.

show logging — displays the logging setting and system messages in the internal buffer.

1508 Simple Network Management Protocol (SNMP) and Syslog