37

Policy-based Routing (PBR)

Policy-based routing (PBR) allows you to apply routing policies to specific interfaces. To enable PBR, create a redirect list and apply it to the interface. After the redirect list is applied to the interface, all traffic passing through the interface is subject to the rules defined in the redirect list. PBR is supported by the Dell Networking Operating System (OS).

You can apply PBR to physical interfaces and logical interfaces (such as a link aggregation group [LAG] or virtual local area network [VLAN]). Trace lists and redirect lists do not function correctly when you configure both in the same configuration.

NOTE: Apply PBR to Layer 3 interfaces only.

NOTE: For more information , refer to Content Addressable Memory (CAM) chapter.

description

Add a description to this redirect list.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

description {description}

To remove the description, use the no description {description} command.

description

Enter a description to identify the IP redirect list (16

 

characters maximum).

none

 

REDIRECT-LIST

 

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.4(0.0)

Introduced on the S4810, S4820T, S6000, and Z9000.

8.4.2.1Introduced on the C-Series and S-Series.

8.4.2.0Introduced on the E-Series Tera Scale.

1176

Policy-based Routing (PBR)

Page 1176
Image 1176
Dell 9.7(0.0) manual Policy-based Routing PBR, Description