Dell 9.7(0.0) Distribute-list out, Command Modes Command History Related Commands, Bgp as number

Command Modes

Command History

Related Commands

•ROUTER ISIS (for IPv4)

•CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

7.5.1.0Added IPv6 ISIS support.

6.3.1.0Introduced.

•distribute-list out — suppresses networks from being advertised in updates.

•redistribute — redistributes routes from one routing domain to another routing domain.

distribute-list out

Suppress network prefixes from being advertised in outbound updates.

Syntaxdistribute-list prefix-list-nameout [connected bgp as number ospf process-id rip static]

To return to the default values, use the no distribute-listprefix-list- name out [bgp as number connected ospf process-id rip static] command.

Parameters	Specify the prefix list to filter prefixes in routing updates.
prefix-list-
name
connected	(OPTIONAL) Enter the keyword connected for directly
	connected routing process.
ospf process-id	(OPTIONAL) Enter the keyword ospf then the OSPF
	process-ID number. The range is from 1 to 65535.
bgp as number	(OPTIONAL) Enter the BGP then the AS Number. The range is
	from 1 to 65535.
rip	(OPTIONAL) Enter the keyword rip for RIP routes.

Intermediate System to Intermediate System (IS-IS) 855