Dell 9.7(0.0) manual Field Description Network, Dell#show ip bgp community ?

Usage Information

Example

VersionDescription

9.4.(0.0) Added support for VRF.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

To view the total number of COMMUNITY attributes found, use the show ip bgp summary command. The text line above the route table states the number of COMMUNITY attributes found.

The show ip bgp community command without any parameters lists BGP routes with at least one BGP community attribute and the output is the same as for the show ip bgp command output.

The following describes the show ip bgp community command shown in the following example.

Field	Description
Network	Displays the destination network prefix of each BGP route.
Next Hop	Displays the next hop address of the BGP router. If 0.0.0.0 is
	listed in this column, then local routes exist in the routing
	table.
Metric	Displays the BGP route’s metric, if assigned.
LocPrf	Displays the BGP LOCAL_PREF attribute for the route.
Weight	Displays the route’s weight.
Path	Lists all the ASs the route passed through to reach the
	destination network.
Dell#show ip bgp community ?
local-AS	Do not export outside local AS (well-
known community)	Do not advertise to any peer (well-
no-advertise
known community)	Do not export to next AS (well-known
no-export
community)	Community number in aa:nn format
aa:nn
	Pipe through a command

Dell#show ip bgp community

BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0 BGP local router ID is 192.168.11.5

Status codes: s suppressed, S stale, d dampened, h history, * valid, > best

Path source: I - internal, a - aggregate, c - confed-external,

422 Border Gateway Protocol