Dell 9.7(0.0) manual Ip pim spt-threshold, Show ip pim bsr-router, Infinity

ip pim spt-threshold

To switch to the shortest path tree when the traffic reaches the specified threshold value, configure the PIM router.

S6000

Syntax	ip pim [vrf vrf-name] spt-threshold [infinity]
	To return to the default value, use the no ip pim [vrf vrf-name] spt-
	threshold [infinity] command.

Parameters

Defaults

Command Modes

Command History

Usage Information

vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
	the VRF to configure the PIM router on that VRF.
	NOTE: Applies to specific VRF if input is provided, else
	applies to Default VRF.
infinity	(OPTIONAL) Enter the keyword infinity to never switch to
	the source-tree.
Not configured.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Added support for VRF. Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

This command is applicable to last hop routers on the shared tree towards the rendezvous point (RP).

show ip pim bsr-router

View information on the Bootstrap router.

S6000

Syntax show ip pim [vrf vrf-name] bsr-router

PIM-Sparse Mode (PIM-SM) 1203