ip ospf auth-change-wait-time
OSPF provides a grace period while OSPF changes its interface authentication type. During the grace
period, OSPF sends out packets with new and old authentication scheme until the grace period expires.
S6000
Syntax ip ospf auth-change-wait-time seconds
To return to the default, use the no ip ospf auth-change-wait-time
command.
Parameters seconds Enter the seconds. The range is from 0 to 300.
Defaults zero (0) seconds.
Command
Modes
INTERFACE
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
ip ospf authentication-key
Enable authentication and set an authentication key on OSPF traffic on an interface.
S6000
Syntax ip ospf authentication-key [encryption-type] key
To delete an authentication key, use the no ip ospf authentication-key
command.
1082 Open Shortest Path First (OSPFv2 and OSPFv3)