Usage

The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.

Information

The maximum number of FIP snooping sessions supported per ENode server is 16.

fip-snooping fc-map

Configure the FC-MAP value FIP snooping uses on all VLANs.

Syntax

fip-snooping fc-map fc-map-value

Parameters

Defaults

Command Modes

Command History

To return the configured FM-MAP value to the default value, use the no fip- snooping fc-mapcommand.

fc-map-valueEnter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.

0x0EFC00

•CONFIGURATION

•VLAN INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the Z9500 and S6000-ON.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

fip-snooping max-sessions-per-enodemac

Configure the maximum session limit per ENode MAC address.

Syntaxfip-snooping max—sessions—per—enode—mac max-sessions-value

To return the configured maximum sessions to the default value, use the no fip- snooping max—sessions—per—enode—maccommand.

FCoE Transit

601

Page 601
Image 601
Dell 9.7(0.0) manual Fip-snooping max-sessions-per-enodemac, Fip-snooping fc-map fc-map-value