Dell 9.7(0.0) manual Debug isis update-packets, Debug isis vrf vrf-name update-packets interface

Command Modes

Command History

trigger detail tied to the VRF that you specify. When SPF is triggered, this debugging information is displayed.

EXEC Privilege

This guide is platform-specific. For command information about other platforms,refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

6.3.1.0Introduced.

debug isis update-packets

Enable debugging on link state PDUs (LSPs) that a router detects.

S6000

Syntax	debug isis [vrf vrf-name] update-packets [interface]
	To turn off debugging, use the no debug isis update-packets
	[interface] command.
Parameters	vrf vrf-name	(OPTIONAL) Enter the keyword vrf followed by the name of
		the VRF to enable the debugging information on IS-IS. This
		information contains updates from neighbors tied to the VRF
		that you specify. This command displays the debugging
		details of the received LSPs from the neighbors.
	interface	(OPTIONAL) Identifies the interface type slot/port as one of
		the following:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

• For a port channel interface, enter the keywords port- channel then a number. The range is from 1 to 128.

850 Intermediate System to Intermediate System (IS-IS)