Dell 9.7(0.0) manual Interface range macro define

Related Commands

shutdown Dell(config-if-range-te-5/1-24,te-1/1-2,vl-2-100,po-1-25)#

interface port-channel — configures a port channel group. interface vlan — configures a VLAN interface.

show config (from INTERFACE RANGE mode) — shows the bulk configuration interfaces.

show range — shows the bulk configuration ranges.

interface range macro (define) — defines a macro for an interface-range.

interface range macro (define)

Defines a macro for an interface range and then saves the macro in the running configuration.

S6000

Syntax

Parameters

Defaults

Command Modes

Command History

define interface range macro name interface , interface , ...

name	Enter up to 16 characters for the macro name.
interface,	Enter the keywords interface range and one of the
interface,...
	interfaces — slot/port, port-channel, or VLAN number. Select
	the range of interfaces for bulk configuration. You can enter
	up to six comma-separated ranges. Spaces are not required
	between the commas. Comma-separated ranges can
	include VLANs, port-channels, and physical interfaces.
	• For a port channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a Tunnel interface, enter the keyword tunnel then
	the tunnel ID. The range is from 1 to 16383.
	• For a VLAN interface, enter the keyword vlan then a
	number from 1 to 4094.
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Interfaces 683