Dell 9.7(0.0) manual Show qos policy-map, Syntaxshow qos policy-map summary interface detail

Parameters

Defaults

Command Modes

Command History

Example

Related Commands

class-name (Optional) Enter the name of a configured class map.

none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

Dell#show qos class-map

Class-map match-any CM

Match ip access-group ACL

class-map — identifies the class map.

show qos policy-map

View the QoS policy map information.

S6000

Syntaxshow qos policy-map {summary [interface] detail}

Parameters	To view a policy map interface summary, enter the keyword
summary
interface	summary and optionally one of the following keywords and
	slot/port or number information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
detail	To view a policy map interface in detail, enter the keyword
	detail and optionally one of the following keywords and
	slot/port or number information:

Quality of Service (QoS) 1275