Dell 9.7(0.0) manual Show system stack-unit quad-port-profile

Command Modes

Command History

Example

Related Commands

•EXEC

•EXEC Privilege

Version 9.7(0.0) Introduced this command.

Dell#show interfaces vlan 10

Vlan 10 is up, line protocol is down

Address is 90:b1:1c:f4:99:ce, Current address is 90:b1:1c:f4:99:ce

Interface index is 1107787786 Internet address is not set

Mode of IPv4 Address Assignment: NONE

DHCP Client-ID: 90b11cf499ce

MTU 1554 bytes, IP MTU 1500 bytes LineSpeed auto

ARP type: ARPA, ARP Timeout 04:00:00

Last clearing of "show interface" counters 2d17h26m Queueing strategy: fifo

Time since last interface status change: 2d17h26m Input Statistics:

0 packets, 0 bytes Output Statistics:

0 packets, 0 bytes, 0 underruns

show interfaces — displays information on a specific physical interface or virtual interface.

show system stack-unit quad-port-profile

Syntax

Parameters

Command Modes

Command History

Example

show system [stack-unit-number]quad-port-profile

stack-unit-	Enter the port number. The range is from 0 to 5.
number
EXEC Privilege
Version 9.7(0.0)	Introduced on the S6000 and S6000–ON.

Dell#show system stack-unit 0 quad-port-profile Configured fan out profile ports in stack-unit 0

Configured	Activated
0	0
8	8
16	16
24	24
32	32

Interfaces 713