Dell 9.7(0.0) manual Optional Enter the keyword byte to count bytes

Defaults

Command Modes

Command History

Usage Information

count	(OPTIONAL) Enter the keyword count to count packets
	processed by the filter.
byte	(OPTIONAL) Enter the keyword byte to count bytes
	processed by the filter.
order	(OPTIONAL) Enter the keyword order to specify the QoS
	priority for the ACL entry. The range is from 0 to 254 (where
	0 is the highest priority and 254 is the lowest; lower order
	numbers have a higher priority) If you did not use the
	keyword order, the ACLs have the lowest order by default
	(255).
fragments	Enter the keyword fragments to use ACLs to control packet
	fragments.

Not configured.

CONFIGURATION-EXTENDED-ACCESS-LIST

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.3.1.0Added the keyword dscp.

8.2.1.0Allows ACL control of fragmented packets for IP (Layer 3) ACLs.

8.1.1.0Introduced on the E-Series ExaScale.

7.4.1.0Added support for non-contiguous mask and added the monitor option.

6.5.1.0Expanded to include the optional QoS order priority for the ACL entry.

The order option is relevant in the context of the Policy QoS feature only. For more information, refer to the Quality of Service chapter of the Dell Networking OS Configuration Guide.

The monitor option is relevant in the context of flow-based monitoring only. For more information, refer to the Port Monitoring chapter.

Access Control Lists (ACL) 201