Dell 9.7(0.0) manual Tacacs-server vrf, Syntaxtacacs-server vrf vrf-namesource-interface interface

Defaults

Command Modes

Command History

Usage Information

key	Enter a text string, up to 42 characters long, as the clear text
	password. Leading spaces are ignored.
Not configured.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.7.1.0Authentication key length increased to 42 characters.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.2.1.1 Introduced on the E-Series.

The key configured with this command must match the key configured on the TACACS+ daemon.

tacacs-server vrf

Create an association between a TACACS server group and a VRF and source interface.

Syntaxtacacs-server vrf vrf-name[source-interface interface]

To delete the association between a TACACS server group and a VRF and source interface, use the no tacacs-server vrf vrf-name[source-interfaceinterface] command.

Parameters	Enter the keyword vrf and then the name of the VRF to
vrf vrf-name
	associate a TACACS server group with that VRF.
interface	Enter the following keywords and slot/port or number
	information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.

1406 Security