Defaults Not configured.
Command
Modes
CONFIGURATION-STANDARD-ACCESS-LIST
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Add the DSCP value for ACL matching.
8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added support for the non-contiguous mask and added the
monitor option.
6.5.10 Expanded to include the optional QoS order priority for the
ACL entry.
Usage
Information The order option is relevant in the context of the Policy QoS feature only. For
more information, refer to the “Quality of Service” chapter of the Dell Networking
OS Configuration Guide.
Related
Commands deny — assigns a IP ACL filter to deny IP packets.
ip access-list standard — creates a standard ACL.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-
to-Increment}
194 Access Control Lists (ACL)