Related

traceroute — views the DNS resolution.

Commands

 

 

ip host — configures a host.

show ip cam stack-unit

Display CAM entries for a port-pipe of a stack-unit on a S-Series or Z-Series switch.

Syntaxshow ip cam stack-unit {id} [port-set {pipe-number} vrf vrf- name {ip-address mask [longer-prefixes [ecmp-group detail]]} ecmp-group {detail member-info [detail [group-index index- number]]} summary]

Parameters

id

port-set pipe- number

vrf vrf-name

network mask [longer- prefixes [ecmp- group detail]]

ecmp-group {detail member-info [detail [group- index index- number]]}

summary

Enter the stack-unit ID. The unit ID range is from 0 to 7 for the S6000.

Enter the keyword port-setthen the number of the stack unit’s port-pipe. The unit ID range is from 0 to 0.

Enter the keyword vrf followed by the name of the VRF to display CAM entries corresponding to that VRF.

(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. You can enter one of the following keywords to filter results.

Enter the keyword longer-prefixesto view routes with a common prefix.

Enter the keyword ecmp-group detail to view the ECMP group index.

(OPTIONAL) Enter the keyword ecmp-groupthen one of the following keywords to filter results.

Enter the keyword detail to view the ECMP group index.

Enter the keyword member-infoto view the member information for the ECMP group.

Enter the keyword member-info detail to view detailed ECMP membership and n-hop information.

Enter the keyword group-indexthen the index number to show ECMP membership per group. The range is from 0 to 1022.

(OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM.

792

IPv4 Routing

Page 792
Image 792
Dell 9.7(0.0) manual Show ip cam stack-unit, Parameters Port-set pipe- number