Dell 9.7(0.0) manual Retry-times, Graceful-restart t2 level-1 level-2 seconds

Parameters

Defaults

Command Modes

Command History

interval	Enter the keyword interval to set the wait time. The range
	is from 5 to 120 seconds. The default is 5 seconds.
retry-times	Enter the keywords retry-timesto set the number of
	times the request interval is extended until a CSNP is
	received from the helping router. The range is from 1 to 10
	attempts. The default is 1.

Refer to Parameters.

ROUTER ISIS

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.3.1.0Introduced on the E-Series.

graceful-restart t2

Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for each database to synchronize.

Syntax	graceful-restart t2 {level-1 level-2} seconds
	To return to the default, use the no graceful-restart t2 command.
Parameters	level-1, level-2	Enter the keywords level-1or level-2to identify the
		database instance type to which the wait interval applies.
	seconds	Enter the gracefule-restart t2 time in seconds. The
		range is from 5 to 120 seconds. The default is 30 seconds.
Defaults	30 seconds
Command	ROUTER ISIS
Modes

Intermediate System to Intermediate System (IS-IS) 861