Dell 9.7(0.0) manual Defaults Command Modes Interface type, Slot/port lease time

Parameters

mac address	Enter the keyword mac then the MAC address of the host to
	which the server is leasing the IP address.
vlan-id vlan-id	Enter the keywords vlan-idthen the VLAN to which the
	host belongs. The range is from 2 to 4094.
ip ip-address	Enter the keyword ip then the IP address that the server is
	leasing.

Defaults

Command Modes

interface type

slot/port lease time

none

•EXEC

•EXEC Privilege

Enter the keyword interface then the type of interface to which the host is connected.

•For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

•For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

•For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.

Enter the slot and port number of the interface.

Enter the keyword lease then the amount of time the IP address is leased. The range is from 1 to 4294967295.

Command History

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the C-Series and S-Series.

show ip dhcp snooping — displays the contents of the DHCP binding table.

Security 1447