Dell 9.7(0.0) manual Distribute-list, Prefix-name Optional Enter a configured prefix list name

Defaults

Command Modes

Command History

Related Commands

prefix-name (OPTIONAL) Enter a configured prefix list name.

weight = 120

ROUTER RIP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

pre- 6.2.1.1 Introduced on the E-Series.

default-metric — assigns one distance metric to all routes learned using the redistribute command.

distribute-list in

Configure a filter for incoming routing updates.

S6000

Syntax	distribute-listprefix-list-name in [interface]
	To delete the filter, use the no distribute-listprefix-list-namein
	command.
Parameters	prefix-list-	Enter the name of a configured prefix list.
	name
	interface	(OPTIONAL) Identifies the interface type slot/port as one of
		the following:

• For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

Routing Information Protocol (RIP) 1307