Dell 9.7(0.0) manual Show storm-control unknown-unicast interface

Defaults

Command Modes

Command History

Example

•For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.

•For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

•For a port channel interface, enter the keywords port- channel then a number.

none

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the C-Series and S-Series.

Dell#show storm-control multicast Tengigabitethernet 1/1

Multicast storm control configuration

Interface	Direction	Packets/Second
-----------------------------------------
Te 1/1	Ingress	5
Dell#

show storm-control unknown-unicast

Display the storm control unknown-unicast configuration.

Syntax	show storm-control unknown-unicast [interface]
Parameters	interface	(OPTIONAL) Enter one of the following interfaces to display

the interface specific storm control configuration:

Storm Control 1543