Dell 9.7(0.0) Match source-protocol, Syntaxmatch source-protocol bgp isis ospf connected static

Defaults

Command Modes

Command History

Usage Information

Related Commands

	number that is specified as the export route target at the
	source VRF.
route-map-	Enter the name of the route-map to filter the imported
name	routes.
	NOTE: You must use the route-map attribute while
	importing routes from the global RTM. Route-maps
	enable you to filter routes at the import end based on
	the matching criteria that you define in the route-map.
N/A
VRF MODE
CONFIGURATION
Version	Description
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, S6000–
	ON, and Z9500.

It is possible to configure multiple import conditions per VRF depending on the exporting VRF.

The export-target and import-target support only the match protocol and match prefix-list options. Other options that are configured in the route-maps are ignored.

ipv6 route-export – exports IPv6 routes to another VRF.

match source-protocol

Enables you to specify matching criteria while exporting or importing routes.

Syntaxmatch source-protocol {bgp isis ospf connected static}

Parameters	Enter the keyword bgp to leak or share routes corresponding
bgp
	to the BGP protocol.
isis	Enter the keyword isis to leak or share routes corresponding
	to the ISIS protocol.
ospf	Enter the keyword ospf to leak or share routes
	corresponding to the OSPF protocol.
connected	Enter the keyword connected to leak or share connected
	routes corresponding to the VRF.

1614 Virtual Routing and Forwarding (VRF)