interface (OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
6.3.1.0 Introduced.
debug isis spf-triggers
Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging
purposes.
S6000
Syntax debug isis [vrf vrf-name] spf-triggers
To turn off debugging, use the no debug isis [vrf vrf-name] spf-
triggers command.
Parameters vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to enable debugging information on IS-IS
corresponding to that VRF. This information contains spf
Intermediate System to Intermediate System (IS-IS) 849