disable
Return to EXEC mode.
Syntax disable [level]
Parameters level (OPTIONAL) Enter a number for a privilege level of the Dell
Networking OS. The range is from 0 to 15. The default is 1.
Defaults 1
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
do
Allows the execution of most EXEC-level commands from all CONFIGURATION levels without returning
to the EXEC level.
Syntax do command
Parameters command Enter an EXEC-level command.
Defaults none
Command
Modes • CONFIGURATION
• INTERFACE
Control and Monitoring 97