Defaults Not configured.
Command
Modes
CONFIGURATION
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Updated the start-day and end-day options to allow for
using the three-letter abbreviation of the weekday name.
6.1.1.0 Introduced on the E-Series.
Related
Commands clock summer-time date — sets a date (and time zone) on which to convert the
switch to daylight saving time on a one-time basis.
show clock — displays the current clock settings.
clock timezoneConfigure a timezone for the switch.
Syntax clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters timezone-
name
Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition
to universal time coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the
number of hours.
System Time and Date 1569