Dell 9.7(0.0) manual Debug fip snooping rx

debug fip snooping

Enable debugging on FIP snooping.

Syntax

Parameters

Command Modes

Command History

debug fip-snooping [all acl error ifm info ipc tx]

all	Enter the keyword all to enable debugging on all the
	options.
acl	Enter the keyword acl for ACL-specific debugging.
error	Enter the keyword error for error-specific debugging.
ifm	Enter the keyword ifm for IFM-specific debugging.
info	Enter the keyword info for information-specific debugging.
ipc	Enter the keyword ipc for IPC-specific debugging.
tx	Enter the keyword tx for packet transmit-specific
	debugging.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the Z9500 and S6000-ON.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

debug fip snooping rx

Enable debugging for FIP snooping receive-specific packets.

Syntax	debug fip-snooping		rx packet-type [all discovery virtual-
	link-instantiation		virtual-link-maintenance vlan-discovery]
	[interface]
Parameters	packet-type	Enter the keyword packet-typeand then the option type

on which to enable debugging. The options are:

598 FCoE Transit