Dell 9.7(0.0) manual Username, Access-class, Nopassword, Secret

Version	Description
8.3.19.0	Introduced on the S4820T.
8.3.11.1	Introduced on the Z9000.
8.3.7.0	Introduced on the S4810.
7.6.1.0	Introduced on the S-Series.
7.5.1.0	Introduced on the C-Series.
pre-6.1.1.0	Introduced on the E-Series.

Usage	The software measures the period of inactivity defined in this command as the
Information	period between consecutive keystrokes. For example, if your password is
	“password” you can enter “p” and wait 29 seconds to enter the next letter.

username

Establish an authentication system based on user names.

Syntaxusername name [access-class access-list-name] [nopassword {password secret} [encryption-type] password] [privilege

level] [role role-name]

If you do not want a specific user to enter a password, use the nopassword option.

To delete authentication for a user, use the no username name command.

Parameters	Enter a text string for the name of the user up to 63
name
	characters.
access-class	Enter the keywords access-classthen the name of a
access-list-	configured access control list (either an IP access control list
name	or MAC access control list).
nopassword	Enter the keyword nopassword to specify that the user
	should not enter a password.
password	Enter the keyword password then the encryption-type
	or the password.
secret	Enter the keyword secret then the encryption-typeor
	the password.
encryption-	Enter an encryption type for the password that you enter.
type	• 0 directs the system to store the password as clear text. It
	is the default encryption type when using the password
	option.
	• 7 to indicate that a password encrypted using a DES
	hashing algorithm follows. This encryption type is
	available with the password option only.
	• 5 to indicate that a password encrypted using an MD5
	hashing algorithm follows. This encryption type is

Security 1389