Dell 9.7(0.0) manual Ip pim bsr-candidate, Clear ip pim rp-mapping command, Hash-mask

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the S-Series.

Usage	This command is applied to the subsequent PIM-BSR. Existing BSR advertisements
Information	are cleaned up by time-out. To clean the candidate RP advertisements, use the
	clear ip pim rp-mapping command.

ip pim bsr-candidate

To join the Bootstrap election process, configure the PIM router.

S6000

Syntaxip pim [vrf vrf-name]bsr-candidateinterface [hash-mask- length] [priority]

To return to the default value, use the no ip pim bsr-candidate [vrf vrf-

name] command.
Parameters	(OPTIONAL) Enter the keyword vrf followed by the name of
vrf vrf-name
	the VRF to configure the PIM router on a VRF.
interface	Enter the following keywords and slot/port or number
	information:
	• For a Loopback interface, enter the keyword loopback
	then a number from 0 to 16383.
	• For a Port Channel interface, enter the keywords port-
	channel then a number. The range is from 1 to 128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a VLAN, enter the keyword vlan then a number from
	1 to 4094.
hash-mask-	(OPTIONAL) Enter the hash mask length. The range is from
length	zero (0) to 32. The default is 30.

PIM-Sparse Mode (PIM-SM) 1191