Usage Information

Related Commands

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

7.5.1.0Added option for SA upper limit and the description option.

6.2.1.1Introduced

The connect-sourceoption is used to supply a source IP address for the TCP connection. When an interface is specified using the connect-sourceoption, the primary configured address on the interface is used.

If the total number of SA messages received from the peer is already larger than the limit when this command is applied, those SA messages continue to be accepted. To enforce the limit in such situation, use the clear ip msdp peer command to reset the peer.

ip msdp sa-limit — configures the MSDP SA Limit.

clear ip msdp peer — clears the MSDP peer.

show ip msdp — displays the MSDP information.

ip msdp redistribute

Filter local PIM SA entries in the SA cache. SAs which the ACL denies time out and are not refreshed. Until they time out, they continue to reside in the MSDP SA cache.

S6000

Syntax

ip msdp redistribute [list acl-name]

Parameters

list acl-nameEnter the name of an extended ACL that contains permitted SAs. If you do not use this option, all local entries are blocked.

Defaults

Not configured.

Multicast Source Discovery Protocol (MSDP)

987

Page 987
Image 987
Dell 9.7(0.0) manual Ip msdp redistribute list acl-name, Defaults Not configured