Dell 9.7(0.0) Default logging console, Default logging monitor, Series legacy command Related

VersionDescription

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

Related	logging buffered — sets the logging buffered parameters.
Commands

default logging console

Return the default settings for messages logged to the console.

Syntax	default logging console
Defaults	level = 7 or debugging
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

E-Series legacy command

Related	logging console — sets the logging console parameters.
Commands

default logging monitor

Return to the default settings for messages logged to the terminal.

Syntax default logging monitor

Simple Network Management Protocol (SNMP) and Syslog 1503