Dell 9.7(0.0) manual Inspection, Macaddress, Retries, Dynamic, Clear arp-cache command

Command Modes

Command History

ip ip-address	(OPTIONAL) Enter the keyword ip then an IP address in the
mask	dotted decimal format. Enter the optional IP address mask in
	the slash prefix format (/ x).
inspection	Enter the keyword inspection with one of the following
	keywords to view ARP entries:
	• database — view a list of ARP entries learned using DAI
	• statistics — view DAI statistics
macaddress	(OPTIONAL) Enter the keyword macaddress then a MAC
mac-address	address in nn:nn:nn:nn:nn:nn format. Enter the optional
mask	MAC address mask in nn:nn:nn:nn:nn format also.
static	(OPTIONAL) Enter the keyword static to view entries
	entered manually.
retries	(OPTIONAL) Enter the keyword retries to show the
	number of ARP retries before a 20–second back off.
dynamic	(OPTIONAL) Enter the keyword dynamic to view dynamic
	entries.
summary	(OPTIONAL) Enter the keyword summary to view a summary
	of ARP entries.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Added support for VRF and added usage information for the
	clear arp-cache command.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

8.2.1.0Added support for 4094 VLANs on the E-Series ExaScale (the prior limit was 2094).

8.1.1.0Introduced on the E-Series ExaScale.

7.9.1.0Introduced VRF on the E-Series.

IPv4 Routing 787