Dell 9.7(0.0) manual Ip telnet server enable

	Version	Description
	9.4(0.0)	Introduced on the S-Series and Z9000.
Usage	Use this command to make the FTP clients VRF-aware. The VRF name that you
Information	specify is used by the FTP client to reach the FTP server. If no VRF name is
	specified, then the default VRF is used.

ip telnet server enable

Enable the Telnet server on the switch.

Syntax	ip telnet server enable
	To disable the Telnet server, use the no ip telnet server enable command.
Defaults	Enabled
Command	CONFIGURATION
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.11.1Introduced on the Z9000.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

Related	ip ssh server — enables the secure shell (SSH) server on the system.
Commands

112 Control and Monitoring