dot1x max-eap-req

Configure the maximum number of times an extensive authentication protocol (EAP) request is transmitted before the session times out.

Syntax

dot1x max-eap-req number

 

To return to the default, use the no dot1x max-eap-reqcommand.

Parameters

number

Enter the number of times an EAP request is transmitted

 

before a session time-out. The range is from 1 to 10. The default is 2.

Defaults

Command Modes

Command History

2

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x max-supplicants

Restrict the number of supplicants that can be authenticated and permitted to access the network through the port. This configuration is only takes effect in Multi-auth mode.

Syntax

dot1x max-supplicants number

Parameters

number

Enter the number of supplicants that can be authenticated

 

on a single port in Multi-auth mode. The range is from 1 to 128. The default is 128.

802.1X

169

Page 169
Image 169
Dell 9.7(0.0) manual Dot1x max-eap-req number, Number, Dot1x max-supplicants number