Dell 9.7(0.0) manual Network, Ip-address Mask

Related	set weight — assigns a weight to all paths meeting the route map criteria.
Commands

network

Specify the networks for the BGP process and enter them in the BGP routing table.

S6000

Syntax network ip-address mask [route-mapmap-name]

To remove a network, use the no network ip-address mask [route-mapmap-name]command.

Parameters

ip-address

mask

route-map map-name

Enter an IP address in dotted decimal format of the network.

Enter the mask of the IP address in the slash prefix length format (for example, /24).

The mask appears in command outputs in dotted decimal format (A.B.C.D).

(OPTIONAL) Enter the keyword route-mapthen the name of an established route map.

Only the following ROUTE-MAP mode commands are supported:

•match ip address

•set community

•set local-preference

•set metric

•set next-hop

•set origin

•set weight

If the route map is not configured, the default is deny (to drop all routes).

Defaults

Command Modes

Command History

Not configured.

ROUTER BGP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Border Gateway Protocol 407