Defaults

Command Modes

Command History

Related Commands

For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.

For a VLAN, enter the keyword vlan then a number from 1 to 4094.

Not configured.

ROUTER RIP

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.29.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.5.1.0Added support for 4-port 40G line cards on ExaScale.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

pre- 6.2.1.1

Introduced on the E-Series.

ip prefix-list — enters PREFIX-LIST mode and configures a prefix list.

distribute-list out

Configure a filter for outgoing routing updates.

S6000

Syntaxdistribute-list prefix-list-nameout [interface bgp connected isis ospf static]

To delete the filter, use the no distribute-listprefix-list-nameout command.

Parameters

Enter the name of a configured prefix list.

prefix-list-

name

 

1308

Routing Information Protocol (RIP)

Page 1308
Image 1308
Dell 9.7(0.0) manual Configure a filter for outgoing routing updates