Line Description
RX Power High
Warning threshold
Factory-defined setting. Value can differ between SFP and
SFP+.
Temp Low
Warning threshold
Factory-defined setting. Value can differ between SFP and
SFP+.
Voltage Low
Warning threshold
Factory-defined setting. Value can differ between SFP and
SFP+.
Bias Low Warning
threshold
Factory-defined setting. Value can differ between SFP and
SFP+.
TX Power Low
Warning threshold
Factory-defined setting. Value can differ between SFP and
SFP+.
Power Low
Warning threshold
Factory-defined setting. Value can differ between SFP and
SFP+.
Temperature Current temperature of the SFPs. If this temperature crosses
Temp High alarm/warning thresholds, the temperature high
alarm/warning flag is set to true.
Voltage Current voltage of the SFPs. If this voltage crosses voltage
high alarm/warning thresholds, the voltage high alarm/
warning flag is set to true.
Tx Bias Current Present transmission (Tx) bias current of the SFP. If this
crosses bias high alarm/warning thresholds, the TX bias high
alarm/warning flag is set to true. If it falls below the low
alarm/warning thresholds, the TX bias low alarm/warning
flag is set to true.
Tx Power Present Tx power of the SFP. If this crosses Tx power alarm/
warning thresholds, the Tx power high alarm/warning flag is
set to true. If it falls below the low alarm/warning
thresholds, the Tx power low alarm/ warning flag is set to
true.
Rx Power Present receiving (Rx) power of the SFP. This value is either
average Rx power or OMA. This depends on the Rx Power
measurement type displayed above. If this crosses Rx power
alarm/warning thresholds, the Rx power high alarm/warning
flag is set to true. If it falls below the low alarm/warning
thresholds, the Rx power low alarm/warning flag is set to
true.
Data Ready state
Bar
This field indicates that the transceiver has achieved power
up and data is ready. This is set to true if data is ready to be
sent and set to false if data is being transmitted.
Rx LOS state This is the digital state of the Rx_LOS output pin. This is set
to true if the operating status is down.
Tx Fault state This is the digital state of the Tx Fault output pin.
Interfaces 719