Dell 9.7(0.0) Row Heading Description LSUpd, LSAck, TxQ-Len, RxQ-Len, Tx-Mark, Rx-Mark, Hello-Q

Row Heading	Description
LSUpd	Number of link state update packets.
LSAck	Number of link state acknowledgement packets.
TxQ-Len	The transmission queue length.
RxQ-Len	The reception queue length.
Tx-Mark	The highest number mark in the transmission queue.
Rx-Mark	The highest number mark in the reception queue.
Hello-Q	The queue, for transmission or reception, for the hello
	packets.
LSR-Q	The queue, for transmission or reception, for the link state
	request packets.
Other-Q	The queue, for transmission or reception, for the link state
	acknowledgement, database description, and update
	packets.

The following describes the error definitions for the show ip ospf statistics process-idglobal command.

Error Type	Description
Intf_Down	Received packets on an interface that is either down or
	OSPF is not enabled.
Non-Dr	Received packets with a destination address of ALL_DRS
	even though SELF is not a designated router.
Self-Org	Receive the self originated packet.
Wrong_Len	The received packet length is different to what was
	indicated in the OSPF header.
Invld-Nbr	LSA, LSR, LSU, and DDB are received from a peer which is
	not a neighbor peer.
Nbr-State	LSA, LSR, and LSU are received from a neighbor with stats
	less than the loading state.
Auth-Error	Simple authentication error.
MD5-Error	MD5 error
Cksum-Err	Checksum Error
Version	Version mismatch
AreaMismatch	Area mismatch
Conf-Issue	The received hello packet has a different hello or dead
	interval than the configuration.
No-Buffer	Buffer allocation failure.

1134 Open Shortest Path First (OSPFv2 and OSPFv3)