Dell 9.7(0.0) manual Fail-mode, Parameters Secure, Vxlan-instance instance ID

Command	Version	Description
History
	9.7(0.0)	Introduced on the S6000-ON.
	9.4(0.0)	Introduced on the S6000.

fail-mode

Configures failure-mode on the platform.

Syntax	fail-mode secure
	To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters	secure	Enter the keyword secure to delete all its database and

hardware flows/resources, when the VTEP loses connectivity with the controller.

Defaults

Command Modes

Command History

non secure

VXLAN INSTANCE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.4.(0.0)	Introduced on the S6000.

Related	vxlan-instance— Enable VXLAN Instance configuration on the platform.
Commands

vxlan-instance

Enable VXLAN Instance configuration on the platform.

Syntax	vxlan-instance instance ID
	To enable the vxlan-instancecommand, use the [no] shut command.
	To delete vxlan-instance from the system, use no vxlan-instance 1
	command.

Virtual Extensible LAN (VXLAN) 1649