Dell 9.7(0.0) Debug ipv6 nd ra-guard, Device-role, Defaults Command Modes History, Interfacetype

VersionDescription

9.7(0.0) Added support for VRF.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.1Introduced on the S4810.

debug ipv6 nd ra-guard

Enable debugging for IPv6 RA guard snooping information.

Syntax Parameters

Defaults

Command

Modes

Command

History

debug ipv6 nd ra-guard [interface_type slot/port count value]

interface_type	Enter the one of the following interfaces and slot/port
slot/port	information:
	• For a port channel interface, enter the keywords port-
	channel then a number.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
count value	Enter the keyword count then the number of debug
	outputs. The range is from 1 to 65534. The default is infinity.
none
EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S4810, S4820T, S5000, S6000, and
	Z9000 switches.

device-role

Specify the role of the device attached to the port.

Syntax	device-role {host router}
	To reset the device role, use the no device-role {host router}
	command.

Neighbor Discovery Protocol (NDP) 1023