Dell 9.7(0.0) Interface vlan, Command Modes History Example Single Range Related Commands, 4094

Command

Modes

Command

History

Example (Single Range)

Related

Commands

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.0Introduced

This example shows the macro named test that was defined earlier.

Dell(config)#interface range macro test Dell(config-if-range-te-1/1-3,te-5/1-47,te-13/1-89)# Dell

interface range — configures a range of command (bulk configuration).

interface range macro (define) — defines a macro for an interface range (bulk configuration).

interface vlan

Configure a VLAN. You can configure up to 4094 VLANs.

S6000

Syntax	interface vlan vlan-id[of-instance{of-id}]
Syntax	interface vlan vlan-id
Parameters	vlan-id	Enter a number as the VLAN Identifier. The range is from 1 to
		4094.
	of-instance{of-	Enter the keyword of-instance then the OpenFlow instance
	id}	ID to add the VLAN to the specified OpenFlow instance. The
		range is from 1 to 8.

Interfaces 685