Dell 9.7(0.0) Show dot1x interface interface mac-address mac-address, Dot1x Status Enable

show dot1x interface

Display the 802.1X configuration of an interface.

Syntax

Parameters

Defaults

Command Modes

Command History

Usage Information

show dot1x interface interface [mac-address mac-address]

interface	Enter one of the following keywords and slot/port or number
	information:
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
mac-address	(Optional) MAC address of a supplicant.
none

•EXEC

•EXEC privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

8.4.2.1Added the mac-addressoption on the C-Series and S- Series.

7.6.1.0Introduced on the C-Series, E-Series, and S-Series.

If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X configuration details (Port Authentication status, Untagged VLAN ID, Authentication PAE state, and Backend state) display for each supplicant, as shown in the following example.

Example	Dell#show dot1x interface tengigabitethernet 1/32
	802.1x information on Te 1/32:
	-----------------------------
	Dot1x Status:	Enable

178 802.1X