Dell 9.7(0.0) manual Clear isis vrf vrf-name tag * database traffic, Tag, Database, Traffic

Usage Information

VersionDescription

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.1Introduced on the S4810.

CAUTION: Use caution when you enter this command. Back up your configuration prior to using this command or your IS-IS configuration will be erased.

clear isis

Restart the IS-IS process. All IS-IS data is cleared.

S6000

Syntax

Parameters

Command Modes

Command History

clear isis [vrf vrf-name] [tag] {* database traffic}

vrf vrf-name	(Optional) Enter the keyword vrf followed by the name of the
	VRF to restart the IS-IS process corresponding to that VRF.
tag	(Optional) Enter an alphanumeric string to specify the IS-IS
	routing tag area.
*	Enter the keyword * to clear all IS-IS information and restart
	the IS-IS process. This command removes IS-IS neighbor
	information and IS-IS LSP database information and the full
	SPF calculation is done.
database	Clears IS-IS LSP database information.
traffic	Clears IS-IS counters.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Added support for VRF. Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

844 Intermediate System to Intermediate System (IS-IS)