vrf vrf-name Enter the keywords vrf and then the name of the VRF this is
used to connect to the SNMP server.
NOTE: Use this attribute to specify a VRF name that is
used to connect to the remote host. If no VRF is
specified, then the default VRF is used.
udp-port port-
number
Enter the keywords udp-port then the UDP (User Datagram
Protocol) port number on the remote device. The range is
from 0 to 65535. The default is 162.
1 | 2c | 3 (OPTIONAL) Enter the security model version number (1, 2c,
or 3):
•1 is the least secure version.
•3 is the most secure of the security modes.
•2c allows transmission of informs and counter 64, which
allows for integers twice the width of what is normally
allowed.
The default is 1.
encrypted (OPTIONAL) Enter the keyword encrypted to specify the
password appear in encrypted format (a series of digits,
masking the true characters of the string).
auth (OPTIONAL) Enter the keyword auth to specify
authentication of a packet without encryption.
md5 | sha (OPTIONAL) Enter the keyword md5 or sha to designate the
authentication level.
•md5 — Message Digest Algorithm
•sha — Secure Hash Algorithm
auth-password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host. Minimum: eight characters long.
priv (OPTIONAL) Enter the keywords priv to initiate a privacy
authentication level setting.
des56 | aes128 (OPTIONAL) Enter the keyword des56 or aes128 to specify
the encryption mode.
•aes128 — Use 128 bit AES algorithm in CFB mode for
encryption.
•des56 — Use 56 bit DES algorithm in CBC mode for
encryption.
priv password (OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent. Minimum: eight
characters long.
Simple Network Management Protocol (SNMP) and Syslog 1495