Dell 9.7(0.0) manual Clear ipv6 route vrf vrf-name * ipv6-address prefix- length

clear ipv6 route

Clear (refresh) all or a specific route from the IPv6 routing table.

S6000

Syntax

Parameters

Command Modes

Command History

clear ipv6 route [vrf vrf-name] {* ipv6-address prefix- length}

vrf vrf-name	(Optional) Enter the keyword vrf followed by the name of the
	VRF to clear the IPv6 routes corresponding to that VRF.
*	Enter the * to clear (refresh) all routes from the IPv6 routing
	table.
ipv6-address	Enter the IPv6 address in the x:x:x:x::x format then the prefix
prefix-length	length in the /x format. The range is from /0 to /128.
	NOTE: The :: notation specifies successive hexadecimal
	fields of zeros.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Added support for VRF.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series TeraScale.

IPv6 Basics 819