Dell 9.7(0.0) manual Mac learning-limit learn-limit-violation, Shutdown

Related Commands

After the MAC address learning limit is reached, the MAC addresses do not age out unless you add the dynamic option. To clear statistics on MAC address learning, use the clear counters command with the learning-limit parameter.

NOTE: If you configure this command on an interface in a routed VLAN, and after the MAC addresses learned reaches the limit set in the mac learning- limit command, IP protocols are affected. For example, VRRP sets multiple VRRP Masters and OSPF may not come up.

When a channel member is added to a port-channel and there is not enough ACL CAM space, the MAC limit functionality on that port-channel is undefined. When this occurs, un-configure the existing configuration first and then reapply the limit with a lower value.

mac learning-limitmac-address-sticky — Replaces deprecated no-station-moveparameter.

show mac learning-limit — displays MAC learning-limit configuration.

mac learning-limit learn-limit-violation

Configure an action for a MAC address learning-limit violation.

S6000

Syntaxmac learning-limit learn-limit-violation {log shutdown}

Parameters

Defaults

Command Modes

Command History

To return to the default, use the no mac learning-limit learn-limit- violation {log shutdown} command.

log	Enter the keyword log to generate a syslog message on a
	learning-limit violation.
shutdown	Enter the keyword shutdown to shut down the port on a
	learning-limit violation.

none

INTERFACE (conf-if-interface-slot/port)

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

Layer 2 923