Parameters

Defaults

Command Modes

Command History

Related Commands

number

Enter the number of rejected SA entries to cache. The range

 

is from 0 to 32766.

none

 

CONFIGURATION

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.4.1.0Introduced

show ip msdp sa-cacherejected-sa — displays the rejected SAs in the SA cache.

ip msdp default-peer

Define a default peer from which to accept all source-active (SA) messages.

S6000

Syntax

ip msdp default-peer peer address [list name]

 

To remove the default peer, use the no ip msdp default-peer {peer

 

address} list name command.

Parameters

peer address

Enter the peer address in a dotted decimal format (A.B.C.D.)

 

 

list name

Enter the keywords list name and specify a standard

 

 

access list that contains the RP address that should be

 

 

treated as the default peer. If no access list is specified, then

 

 

all SAs from the peer are accepted.

Defaults

Not configured.

 

982

Multicast Source Discovery Protocol (MSDP)

Page 982
Image 982
Dell 9.7(0.0) manual Ip msdp default-peer peer address list name, Peer address, List name