Dell 9.7(0.0) manual Show ip rip database, Dellconf-routerrip#show config

	Version	Description
	pre- 6.2.1.1	Introduced on the E-Series.
Example	Dell(conf-router_rip)#show config
	!

router rip

network 172.31.0.0 passive-interface TenGigabitEthernet 1/1

Dell(conf-router_rip)#

show ip rip database

Display the routes that RIP learns. If the switch learned no RIP routes, no output is generated.

S6000

Syntax

Parameters

Command Modes

Command History

show ip rip database [ip-address mask]

ip-address	(OPTIONAL) Specify an IP address in dotted decimal format
	to view RIP information on that network only. If you enter an
	IP address, also enter a mask for that IP address.
mask	(OPTIONAL) Specify a mask, in /network format, for the IP
	address.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

pre- 6.2.1.1 Introduced on the E-Series.

1324 Routing Information Protocol (RIP)