The following lists the dot1p priority-queue assignments.
dot1p Value in the
Incoming Frame
Description heading
00
10
20
31
42
53
63
73
show dcb
Displays the data center bridging status, the number of PFC-enabled ports, and the number of PFC-
enabled queues.
Syntax show dcb [stack-unit unit-number] [port-set port-set-number]
Parameters unit-number Enter the DCB unit number.
port-set-
number
Enter the port-set number.
Command
Modes
EXEC Privilege
Command
History This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Specify a stack-unit number on the Master switch in a stack.
Example Dell# show dcb
stack-unit 1 port-set 0
DCB Status : Enabled
Data Center Bridging (DCB) 481