Dell 9.7(0.0) manual Aggregate-address, Format A.B.C.D and mask in /prefix format /x

aggregate-address

To minimize the number of entries in the routing table, summarize a range of prefixes.

S6000

Syntax

Parameters

aggregate-address ip-addressmask [advertise-map map-name] [as- set] [attribute-map map-name] [summary-only] [suppress-map map-

name]

ip-address	Enter the IP address and mask of the route to be the
mask	aggregate address. Enter the IP address in dotted decimal
	format (A.B.C.D) and mask in /prefix format (/x).

advertise-map map-name

as-set

attribute-map map-name

summary-only

suppress-mapmap-name

(OPTIONAL) Enter the keywords advertise-mapthen the name of a configured route map to set filters for advertising an aggregate route.

(OPTIONAL) Enter the keyword as-setto generate path attribute information and include it in the aggregate.

AS_SET includes AS_PATH and community information from the routes included in the aggregated route.

(OPTIONAL) Enter the keywords attribute-mapthen the name of a configured route map to modify attributes of the aggregate, excluding AS_PATH and NEXT_HOP attributes.

(OPTIONAL) Enter the keyword summary-onlyto advertise only the aggregate address. Specific routes are not advertised.

(OPTIONAL) Enter the keywords suppress-mapthen the name of a configured route map to identify which more- specific routes in the aggregate are suppressed.

Defaults

Command Modes

Command History

Not configured.

•ROUTER BGP ADDRESS FAMILY

•ROUTER BGP ADDRESS FAMILY IPv6

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

338 Border Gateway Protocol